|
See How Guardian Transfer Switches are installed.

1) Generac #RTS-N-200A3, 200amp transfer switch installed with a 150amp main breaker feed. This application applies when you have a 150amp electrical service.

2) Typical 12 Circuit transfer switch installation.

3) This solution allowed Home Power Systems to install a 13kw whole house transfer solution by separating the A/C loads from the transfer switch. Notice the 4 circuit subpanel below the main breaker. When standby power is applied, the A/C loads are not connected.

4) Whole house transfer solution using a Generac RTS-E-200A3 transfer switch.

5) Another whole house transfer installation. HPS also installed a new electrical service for this customer. A tough installation with only a 4' crawl space.

6) HPS stocks all RTS type transfer switches and generator ready kits.

7) Parallel, SE rated transfer switches installed powered by one liquid generator.

8) This is a great solution offered for very large homes that do not want to spend alot of money. This is a 20-circuit solution with an RTS-N-100A3 transfer switch.

9) Close up picture of a service entrance rated, 200amp Generac transfer switch model RTS-E-200A3 used for whole house transfers. Notice the two breakers, one for the main service and one dedicated to the generator.

10) Another example of a whole house generator install.

11) Another 20 circuit solution using the RTS-N-100A3 Generac transfer switch.

12) This is a whole facility transfer. Notice all power first runs through the transfer switch than to the distribution wireway.

13) An emergency service call to a burned up transfer switch. The installer did not label the cables correctly and landed the neutral cable on the hot side of the switch....poof!

14) Good thing the Generac transfer switches are made tough.

15) No problem with this install....oh, it was installed, commissioned and tested by Home Power Systems.
Please feel free to contact us toll free with any questions you have on transfer switches or any other generator solutions. We are here to assist and support your standby generator needs. |