See How Generac Liquid Cooled Generators are installed.

1) Installation of an 80kw, Generac three phase generator for First Allied in Rochester, NY. Customer has issues with flooding and requested our Commercial Power Systems division to design a solution to raise the generator 14" off the ground. Steel bollards were installed to protect the generator from vehicle traffic. This is a whole building backup solution with a Generac 800amp transfer switch.

2) Installation of a 60kw, 3-phase generator at Lake Beverages in Henrietta, NY by our Commercial Power Systems Division. Notice that all Generac generators are the new off white color.

3) Installation of a 60kw, three phase generator for Employee Relations in Rochester, NY. This solution provides whole building transfer.

4) Electrical installation of a QuietSource generator. Notice two separate
conduits, 1 for controls and 1 for power feed to transfer switch from generator.
All electrical terminations are inside the enclosure.

5) A 30kw model 5402 installed. Clean, neat installation. Notice the updated color of all the Generac generators.

6)

7) This is the new color for most of the liquid cooled generators provide by Guardian / Generac. This is a three phase, 120/208v, 25kw generator installed for the Perinton Fire Department.

8) Home Power Systems professional installation of a residential generator. We use a crane to install your generator when site conditions warrant this.

9) The low profile structure of Generac's 60kw generators offer plenty of power in a compact enclosure.

10) Guardian Elite 25kw generator installation model # 5324. Notice 5' away from building structure and windows. Installed on 6" thick concrete pad.

11) A nice clean looking installation for this home.

12) Residential installation of a 45kw generator. Even residential natural gas services need to be upgraded to support a larger generator installation.

13) Another 25kw Elite generator install.

14) 25kw QuietSource being lifted and craned in place.

15) Professionally installed using a 110' boom to crane over a residential property. The home owner was very surprised how fast this process took.

16) Lowering in place. Radio communication to the crane operator from the rigging forman.

17) Conrete pad ready to accept 25kw liquid cooled genertor. Notice the electrical conduits stubbed up on upper right side and the gas piping exposed on the slab.

18) A liquid cooled standby generator was installed at this home to keep the midnight candle (lighthouse) burning. Everbody has a reason for a generator...I like this one!

19) 500 gallon, underground, liquid propane tank installation.

20) Installation of an underground 500 gallon liquid vapor propane tank. This install
was for a fuel source for a 35 kW QuietSource generator.
Projected run time under full load is seven days.

21) Underground PVC electrical conduit install from generator to home.

22) Liquid vapor propane, final connection, to a QS generator.
This is what a professional installation looks like.

23) Another 25kw QuietSource install. This looks great! See our new updated models.

24) Final positioning of a 60kw Guardian generator on concrete pad. Notice the electrical conduit stub up lower part of picture.

25) Rigging in place 60kw Guardian generator.

26) This 25kw Guardian Elite was installed for the Rochester Home Builders Association. Home Power Systems is proud to be part of this professional organization. Most installation services for this generator were donated to this worthy organization.

27) HTS, 400amp, 3-phase, 120/208v Generac transfer switch. On the right is a 400amp fused safety switch which provides overcurrent protection to the transfer switch. This is a typical installation.