- 1) Installation of an 80kw, Generac three phase generator for First Allied in Rochester, NY. Customer has issues with flooding and requested our Commercial Power Systems division to design a solution to raise the generator 14" off the ground. Steel bollards were installed to protect the generator from vehicle traffic. This is a whole building backup solution with a Generac 800amp transfer switch.
- 2) Installation of a 60kw, 3-phase generator at Lake Beverages in Henrietta, NY by our Commercial Power Systems Division.
- 3) Installation of a 60kw, three phase generator for Employee Relations in Rochester, NY. This solution provides whole building transfer.
- 4) Electrical installation of a QuietSource generator. Notice two separate conduits, 1 for controls and 1 for power feed to transfer switch from generator. All electrical terminations are inside the enclosure.
- 5) A 30kw model QT03016 installed. Clean, neat installation.
- 7) 45kw single phase QT04524 installed in Skaneateles, NY. Another happy Home Power Systems customer.
- 8) Home Power Systems professional installation of a residential generator. We use a crane to install your generator when site conditions warrant this.
- 9) The low profile structure of Generac's 60kw generators offer plenty of power in a compact enclosure.
- 10) This is an installation of a 45kw generator at Penfield Ambulance. This was a replacement for an old Onan generator that no longer worked.
- 11) A 100kw generator install for Ronald McDonald House. Notice the new models do not have exhaust stacks...clean looking generator!
- 12) Residential installation of a 45kw generator. Even residential natural gas services need to be upgraded to support a larger generator installation.
- 13) Delivery of new 30kw QT03016 Penfield Ambulance.
- 14) Professionally installed using a 110' boom to crane over a residential property. The home owner was very surprised how fast this process took.
- 15) Lowering in place. Radio communication to the crane operator from the rigging foreman.
- 16) Concrete pad ready to accept 25kw liquid cooled generator. Notice the electrical conduits stubbed up on upper right side and the gas piping exposed on the slab.
- 17) A liquid cooled standby generator was installed at this home to keep the midnight candle (lighthouse) burning. Everybody has a reason for a generator...I like this one!
- 18) 500 gallon, underground, liquid propane tank installation.
- 19) Installation of an underground 500 gallon liquid vapor propane tank. This install was for a fuel source for a 35 kW QuietSource generator. Projected run time under full load is seven days.
- 20) Underground PVC electrical conduit install from generator to home.
- 21) Liquid vapor propane, final connection, to a QT generator. This is what a professional installation looks like.
- 22) Another 60kw generator install for Keuka Community College. This power plant backs up all campus servers and disaster recovery data building. Engineered and designed by Commercial Power Systems a division of Home Power Systems
- 25) This is Generac's new 7kw "Core Power" generator. It comes with an 8-circuit transfer switch. Great solution for just the basics.
- 26) HTS, 400amp, 3-phase, 120/208v Generac transfer switch. On the right is a 400amp fused safety switch which provides overcurrent protection to the transfer switch. This is a typical installation.
- 27) New Generac 48kw generator QT04842 installed in Victor, NY. Again, the foundation is solid and looks great in this setting.